Hunter FLOW-CLIK-IMMS Flow Sensors - Designed for IMMS usage
The hazards of an over-flow situation involving a large commercial system know no economic boundries. A broken pipe and the damage and liability incurred can result in serious economic consequences, depending upon the value of the property flooded, eroded or destroyed. On a lesser scale this situation can occur with a light commercial or even residential system. That's why Hunter has developed the Flow-Clik, an economical way to monitor and control the flow through any irrigation system, shutting down water flow if required.
The FLOW-CLIK-IMMS is user-adjusted to tolerate a normal ambient water flow within the adjusted range. Should a broken pipe result in a drammatic increase in water flow, as the pipe exits the break, the Flow-Clik senses the increase in flow velocity and immediately shuts down the system, ending the water flow and erosion problem immediately after the break oocurs. For liability reduction, erosion prevention, and an easy means of water conservation, there is no better low cost solution than the Hunter Flow-Clik.
Hunter FLOW-CLIK-IMMS features:
- Reduced cost for rupture or break related repairs
- Unanticipated budget allocations kept to a minimum
- Interface panel provides ongoing display of system status
- "Overflow watchdog" provides constant update for any system
- Compatible with all commercial and residential piping systems
- Large flow range provides complete flexibility
- Customized calibration for precise system control
- Every irrigation system is set individually with a single push button
- Multi-color LED provides at-a-glance system status
- Displays if power is applied whether flow rate is acceptable
Dimensions:
- Flow-Clik Sensor: Height 5.25 inches, Width 2.5 inches, Length 5.4 inches
- Flow-Clik Interface Panel: Height 4.5 inches, Width 5.5 inches, Depth 1.5 inches
Operating Specifications:
- Temperature Toleration: 0 -150 degrees F
- Pressure Toleration: Up to 200 lbs psi
- Humidity: Up to 100%
- Flow Rates Tolerated and monitored: 6 GPM to 120 GPM
Electrical Specifications:
- Current draw: at 24VAC .025Amps
- Switching Current: 2.0 Amps
- Maximum Distance between Interface Panel and Sensor: 1000 feet
Additional features:
- Programmable Start-up Delay: (0 to 300 seconds)
- Programmable Interrupt Delay: (2 to 60 Minutes)
- System Status Light
- One Button System Calibration to Highest Flow
Models and Pricing:
- FLOW-CLIK-IMMS: Designed exclusively for use with the IMMS - Irrigation Management and Monitoring System - Includes sensor and interface box (price excludes sensor body which must be selected on option bar)
