XCZ-075-PRF-BF
3/4" pre-assembled kit with Low Flow in-line valve and automatic Back Flush Filter
This compact, factory assembled two-piece kit combines the 3/4” Low Flow Valve with the 3/4" Pressure Regulating Back Flush Filter to save installation time. The Low Flow Valve is the only valve on the market that can effectively handle low flows (below 3 gpm (0,19 l/s)) without weeping. The Pressure Regulating Back Flush Filter is a 200 mesh (75 micron) automatic self-cleaning filter that includes a 30 psi (2,1 bars) pressure regulator. The Back Flush Filter should be used in municipal water applications only.
Also keep in mind that the auto backflush requires complete loss of pressure, then pressuring back up to work; in other words the backflush filter must always be located on the discharge side of a valve used to control water to a watering zone or system.
Specifications
- Flow: 0.2 to 5 GPM (0.01 to 0.32 l/s)
- Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bar)
- Regulated Pressure: 30 psi (2,1 bar)
- Filtration: 200 mesh (75 micron)
- Connections: ¾” inlet and outlet
- Size: 10” (25.4 cm) overall length
Caution: An in-line check valve may be required if the kit is not at the highest point in the irrigation system.
