XACZ-100-PRF-BF
1” kit with Anti-Siphon Valve and Pressure Regulating Back Flush Filter

This two-piece kit includes the 1” Anti-Siphon Valve with the 1” Pressure Regulating Back Flush Filter. The Anti-Siphon Valve combines the reliable DV valve with an atmospheric vacuum breaker for backflow prevention and has IAPMO approved listing. The Pressure Regulating Back Flush Filter is a 200 mesh (75 micron) automatic self-cleaning filter that includes a 40 psi (2,8 bars) pressure regulator. The Back Flush Filter should be used in municipal water applications only.

Also keep in mind that the auto backflush requires complete loss of pressure, then pressuring back up to work; in other words the backflush filter must always be located on the discharge side of a valve used to control water to a watering zone or system.

Specifications

• Flow: 3 to 15 GPM (0,19 to 0,95 l/s)
• Inlet Pressure: 20 to 120 psi (1,4 to 8,3 bar)
• Regulated Pressure: 40 psi (2,8 bar)
• Filtration: 200 mesh (75 micron)
• Connections: 1” inlet and outlet (NPT)
• Size: 14” (35,6 cm) overall height

Caution: An in-line check valve is required if the kit is not at the highest point in the irrigation system.