16mm Distribution Tubing with built-in emitters 
Distribution Components

Features & Benefits:

• Co-Extruded from the finest linear, low-density, UV-resistant polyethylene resin materials.
• Attractive brown outer color to match landscape and Landscape Dripline in-line emitter tubing.
• Compatible with Landscape Dripline (I.D.: 0.54", OD: 0.63")
• Accepts any Rain Bird 16mm barb insert fittings, 600 Series compatible fittings, Universal fittings or LOC fittings.
• Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications.
• Rain Bird's patented ADI emitter (Advanced Drip Inline) pressure compensates by "lengthening" the emitters turbulent flow path instead of reducing the cross-sectional area of the emitter's flow path. The result is unsurpassed clog-resistance over the long term.
• Cylindrical design of Rain Bird's ADI emitter provides surface area for filtration throughout 360 degrees of its inner circumference.
• Dual outlet ports on every Rain Bird emitter act in combination as a micro air vacuum relief valve.
• Use an Air Relief Valve Kit when installation is below soil.
• Accepts Rain Bird Easy Fit Compression Fittings, 16mm Barb Insert Fittings and LOC Fittings.
• Operating Range: 8.5 thru 60 lbs psi.
• Temperature: up to 100 degrees ambient, water temp up to 125 degrees.
• Flow rates: 0.61 GPH and 0.92 GPH
• Required Filtration: 120 Mesh minimum filtration required.
• Inside Diameter: 0.540 inch
• Outside Diameter: 0.630 inch
• Wall Thickness: 0.045 inch