L20H - Brass-Plastic Combo Low Angle Impact with 10 Degree Low Angle Trajectory, Full Circle Only, Half-Inch Male Bearing, Plastic Body and Arm, Nozzles must be ordered seperately. See links for appropriate nozzle types.
Used primarily in undertree permanent systems. Exceptionally strong drive due to the patented self-flushing wedge drive arm which allows for low precipitation rates required for tight and problem soils.
This is a half-inch impact ag head and any nozzle designated as fitting half-inch bodies will fit this head. See Links for appropriate nozzles and types.
L20H
1/2" Brass Impact Sprinkler
Primary Applications:
1/2 inch Full Circle only, Brass Impact Sprinkler
Features and Benefits:
- Durable brass die-cast arm
- Stainless steel springs and fulcrum pin
- Chemically resistant washers
- Two-year warranty
- Spoon drive arm runs on larger nozzles and higher pressures
- Corrosion and grit resistant
- Built to last
Models:
Specifications:
- Bearing: Half-Inch Male NPT, Brass
- Trajectory Angle: 10 degrees
- Operating Range: 25-80 psi
- Flow Rate: 1.73-4.05 GPM
- Radius: 24-35ft.
AO6015
Weight: 0.60 lbs
|
