Low Flow Valve
Control Zone Components

The only valve in the industry made especially for drip irrigation systems.

This valve contains all of the features of Rain Bird’s reliable DV or ASVF valve, coupled with a unique diaphragm design and internal configuration that allows water flow and particles to pass through at extremely low flow rates, thereby preventing weeping of the valve that is so common when standard irrigtation solenoid valves are used for drip mist applications. Most standard irrigation valve tend to weep and not close fully when used at very low flow levels, this is not a problem with this Rainbird valve specifically designed for drip-mist low flow situations.

Features & Specifications

• Unique “double-knife” diaphragm coupled with 1/2" diameter seat for flawless operation at low flow rates
• Available in 3/4" and 1" models
• Double-filtered pilot flow design for maximum reliability
• External bleed to manually flush system of dirt and debris during installation and system start-up
• Internal bleed for spray-free manual operation

Operating Ranges

• Flow: 0.20 – 5.0 GPM (45,42 to 1136 l/h; 0,01 to 0,32 l/s)
• Pressure: 15 to 150 psi (1,0 to 10,3 bars)

Electrical Specifications

• 24 VAC 50/60 Hz (cycles/sec) solenoid
• Inrush current: 0.30 (7.2 VA) at 60 Hz
• Holding current: 0.19 A (4.56 VA)

Dimensions

• Height: 4 1/2" (11,4 cm)
• Length: 4 1/4" (10,7 cm)
• Width: 3 1/3" (8,4 cm)

Models

• LFV075: 3/4" Low Flow Valve
• LFV100: 1" Low Flow Valve
• ASV-LF-075: 3/4" Low Flow Anti-Siphon Valve