Available for Same Day or Next Day Shipment. The Flexcon WWT-35 Well Pressure Tank Diameter is 16 inches wide x 42.75 inches tall and this tank has a female threaded 1 inch bottom inlet. The WWT-35 Tank has equal specifications and is a direct replacement for all tank brands and models listed at bottom of page*
Drawdown (before pump kicks on) is 13.3 gallons with a 20-40 pressure switch, 11.3 gallons with a 30-50 pressure switch and 9.7 gallons with a 40-60 pressure switch.
The WWT-35 tank is equivilent in performance to a 82 gallon galvanized (non-bladder) tank, and has an actual tank water volume of 33.0 gallons.
The WWT-35 tank has a factory pressure charge of 38 lbs psi. Regardless of what tank brand or size you install, your tank diaphragm or bladder pressure must be adjusted to your pressure switch situation at time of tank installation in order for your well system to operate correctly. Follow link provided for tank installation and pressure adjustment instructions.
Notice - Our entire stock of Flexcon H2Pro, Well-X-Trol and Flexcon Challenger tanks all contain Diaphragms now instead of "bladders" for longer service life.
Flexcon H2Pro tanks are one of the more popular well water tanks on the market. Efficient and cost-effective, H2Pro tanks are designed with a patented controlled action, double diaphragm assembly that is completely contained in a pre-pressurized air cushion that reduces condensation and regulates diaphragm action.
H2Pro tanks have a a welded malleable elbow and an adjustable air charge. Clean, airtight welds are achieved using the most modern welding equipment available.
Flexcon H2Pro tanks are completed with an appliance quality off-white (not clashing blue) paint finish over primer coat, which combines durability, high luster, causes less heating due to sun (because of color) and blends particularly well with the earth colors used on many homes.
Flexcon interior bladders are constructed with a FDA approved high grade butyl. Flexcon tanks true airflow design means fewer problems with condensation. Flexcon diaphragms positive lock internal clench ring cannot slip and does not rely on the tank wall. The tank contains a stainless steel port diffuser, and water connection which directs water flow upward and outward while locking the lower diaphragm in place.
All of our quality Flexcon tanks are backed by a five year written, limited warranty. Flexcon H2Pro tanks are quality tested at four different stages on the production line. Tests include helium and high pressure tests to ensure the structural integrity of every tank.
At Lubee's we have recommended and installed the H2Pro well tanks for years because of our respect for the quality of the product and our belief that it is the most cost-effective well bladder tank available today.
The only difference between the Flexcon H2Pro tank and the Flexcon Challenger tank is the color - the Challenger tanks are blue, the H2Pro tanks are Almond color. We have found the lighter almond color of the H2Pro tank seems to resist fading better, heats up the water inside less on hot sunny days and is less noticeble as it blends in with house and shrubbery, so is less subject to theft and vandilism than is the Challeger blue-colored tank, which is more noticeable.
*The H2Pro WWT-35 is a direct replacement for the Challenger PC122, Well-Rite WR120, Well-X-Trol WX-203, Wel-Flow WF100, Champion CM8003, How 2 Tank HT32, Goulds or A O Smith V100, State Perma Tank PAD-36, Well Mate WM9, and Sta-Rite Pro-Source PS82T-T05 tanks.
Questions? Call us at 352-573-7531 for valid answers.
