Goulds 13GS10412 - One HP Submersible Pump

Goulds 13GS10412 - One HP Submersible Pump - 13 GPM

Goulds 13GS10412 - 1 HP Sub Pump - 13 GPM
SPECIAL NET DISCOUNT PRICE!

Was Is

Goulds 13GS Series 13 GPM 1 Horsepower 3 wire Submersible Pump with Control Box included. 220-230 Volts.

PUMP OUTPUT: Operating at 60 lbs psi pressure the 13GS10 will produce the following GPM (gallons per minute) at the following lifts (measured from well water table level to highest point of water usage): 20 Ft Lift = 17.6 GPM, 40 Ft Lift = 16.6 GPM, 60 Ft Lift = 15.4 GPM, 80 Ft Lift = 14.1 GPM, 100 Ft Lift = 12.8 GPM, 120 Ft Lift = 11.4 GPM, 140 Ft Lift = 9.5 GPM, 160 Ft Lift = 6.0 GPM.

All water production figures listed are considered to be within acceptable operating specs for this pump and motor. Declining or recovering water table, or pump down can effect water production of a well. We chose to rate our pumps at 60 lbs psi because it is excellent pressure that can be used very effectively for irrigation and will also work great for in-house use. Using the 60 lbs psi rating also builds in a margin of safety in case drought conditions lower the water levels.

Using this pump in lift situations that are less than the minimum or more than the maximum lifts listed is not recommended.

Notice - Be advised that all Goulds and all Sta-Rite pump motors and control boxes are no longer being manufactured by Franklin Electric. We are proud to announce that Betta Flo Pumps will continue to use high quality Franklin Electric motors and control boxes to assure the continued high quality and longevity of their pumps.

Field Proven Design: The GS Series Goulds Submersible pumps feature super strong construction due to welded casing joints at both ends. The proprietary engineered polymer bearings have been field-proven with great success.

Powered for continuous operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.

Sand Handling Design: Goulds face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.

FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearings are constructed of glass-filled engineered composites. They are corrosion-resistant and non-toxic.

Discharge Head: Cast stainless steel discharge head features built-in safety loops and an upthrust limiting stud which is factory set to prevent the rotating assembly from up-thrusting.

These pumps REQUIRE a seperate field-installed external CHECK-VALVE to prevent backflow.

Bowls: Stainless steel for strength and abrasive resistance.

Stainless steel casing: Polished stainless steel is strong, attractive and corrosion-resistant.

Hex Shaft Design: Six sided shafts for positive impeller drive.

Shaft Coupling: Exposed for ease of field alignment to motor shaft and to check pump rotation.

Bearings: Proprietary engineered polymer bearings material is super strong.

13GS10412
Weight: 42.00 lbs