30PWH - Three-Quarter inch Brass Impact with Aluminum Arm, Dual Nozzle Ports.
Note - although this head does have dual nozzle ports for a range nozzle and rear spreader (in close) nozzle, it is designed (with aluminum drive arm) to operate in low pressure situations. For this reason we are are recommending use of only the one range nozzle, with a plug installed in the other (spreader nozzle) port. If you find you have adequate pressure, you can always replace the spreader port plug with a spreader nozzle. This head is sold with Range Nozzle Option, but we do include a plug and do not offer any Spreader Nozzle Port Option. Additional Nozzles for both Nozzle Ports and plugs can be purchased seperately. See Links for appropriate Nozzles and Plugs for this Ag Impact Head.
30 PWH
Three-Quarter inch Brass Impact Sprinkler - Less Range Nozzle - Spreader Nozzle Port Plug Included. Order nozzles or additional plugs seperately.
Primary Applications:
Three-Quarter inch Full Circle, Brass, Low Angle Impact Sprinkler
Features and Benefits:
- Durable die-cast, anodized, aluminum arm
- Stainless steel springs and fulcrum pin
- Chemically resistant washers
- Dual nozzle ports
- Two-year warranty
- Aluminium arm allows for smaller nozzles and lower pressures
- Wide range of flow rates
- Corrosion and grit resistant
- Built to last
Model:
Specifications:
- Bearing: Three-Quarter inch Male NPT, Brass
- Trajectory Angle: 27 degrees
- Operating Range: 25-80 psi
- Flow Rate: 1.7 - 5.5 GPM
- Radius: 38-46ft.
A11355
Weight: 0.60 lbs
|
