|
70CHM - Brass One Inch Male Body Impact Head with 21 Degree Trajectory, Dual Range and Spreader Nozzle Configuration and Integral Straightening Vane - with Nozzle Options.
Additional Nozzles or Nozzle Port Plugs are available seperately (see Links).
A Rainbird SPB-1 Brass Spreader Bushing is also offered as an option.
The 70CHM is designed for general field use and for use on mechanically moved systems, especially center pivot machines. Primarily uses on Field Crops, Row Crops, Vegetables, Nurseries, Permanent Systems, Solid Systems, Portable Systems and Wheel Lines. Nozzles must be ordered seperately. See Links for appropriate nozzles and plugs for this Ag Impact Head.
70CHM
One inch Brass Male Body Impact Sprinkler - with Range Nozzle, Spreader Nozzle, SPB-1 Spacer Bushing and Nozzle Port Plug Optional.
The Female Body version of this head is the Model 70CH and is also available.
The difference is this male body Impact head has male thread at the base of the head and screws INTO a fitting, whereas the female body has female thread at the base (as shown in photo) and screws ONTO a fitting.
Primary Applications:
One inch Full Circle Brass Impact Sprinkler
Features and Benefits:
Heavy duty brass construction
One inch Female NPT Bearing
Integral Straightening Vane -Female
Stainless steel springs and fulcrum pin
Chemically resistant washers
Dual nozzle ports
Two-year warranty
Integral straightening vanes increase distance of throw
Wide range of flow rates
Corrosion and grit resistant
Built to last
Model:
70CHM
Specifications:
Bearing: One inch female NPT, Brass
Trajectory Angle: 21 degrees
Operating Range: 40-80 psi
Flow Rate: 8.8-45.8 GPM
Radius: 57-82ft.
Note - remember you will need an SPB-1 Brass Spacer Bushing (order from pull-down menu) if you intend to use a LAN-1-20 Spreader Nozzle on a one inch body such as the 70 Series. The Bushing is 3-8ths MIPT x 1-8th inch FIPT to adapt the 1-8th inch threaded Spreader Nozzle to the 3-8ths inch rear nozzle port thread.
SBN-4 Brass Straight Bore Nozzle are recommended for use with this impact head.
A20030
Weight: 8.00 lbs
| 