FC-KIT Hose Faucet Connection and Filter Kit
FC-KIT
SPECIAL NET DISCOUNT PRICE!
Connects your drip system half-inch tubing up to any outdoor hose faucet or hose end easily and quickly. Everything you need included and assembled.
This multifunction kit ensures proper operation of your drip irrigation system while providing everything you need to go from your standard outside house hose faucet to any brand name half-inch drip-mist feeder tubing. Simply screw the device onto your hose faucet, then connect your half-inch drip-mist tubing to the quick and easy compression fitting, turn on the faucet and the water will flow to your drip-mist system.
The Faucet Connection Kit easily attaches to any outdoor faucet. Can also be used to connect to a garden hose. Pressure regulator and 150 mesh screen filter help to ensure proper operation of the system.
All adapters, anti-siphon vacuum breaker, pressure regulator, and 150 mesh screen filter are included and assembled for you.
 |
Kit includes:
- Backflow preventer
- 2 Brass Adapters
- Hose thread Connector
- 25 psi pressure regulator
- 150 mesh filter
- Compression Connector for half-inch tubing
NOTES:
1. To automate your system, add a hose-end timer.
Place it between the backflow preventer and psi regulator.
2. If more than one tubing zone is being served by the faucet,
add a Y connection to the faucet and connect seperately using two kits.
3. If system is not working properly, first check 150 mesh filter to
make sure it is not clogged with dirt.
TIP: Minimum operating pressure for a drip system is 15 psi,
maximum is 25-30 psi. The Faucet Connection Kit (FC-KIT) contains a 25-30 psi regulator to reduce higher pressures. The connection kit also incorporates a 150-200 mesh filter to protect the tubing emitters and micro-sprays. CAUTION: Not using a pressure regulator and filter may result in damage or clogging of your system.
Weight: 0.30 lbs